Sunlight Supply
Reflector Options |
 |
The Super Sun Reflector
with Adjust-A-Socket Mechanism is 21 in. long x (18 ¼ in. with glass end bars removed) 11
¼ in. wide x 6 ½ in. tall. This reflector was developed in conjunction with Lighting
Sciences of Arizona. Their goal was to develop the best reflector on the H.I.D. market.
According to their tests, they achieved this goal. Using a 1000-watt MH and a 1000-watt
HPS, they tested this new hood from distances of 3, 4, and 5 feet. From these heights, the
Super Sun Reflector out performed all major competitors in average foot candle output
(lumens) and uniformity. Using imported high-grade aluminum for the reflective insert,
this hood only weighs 7 pounds. The hood is air cooled adaptable and is built with an
Electro galvanized steel outer housing. The compact size makes it perfect for tight
growing applications, puts less stress on light moving motors and is perfect for
commercial and residential greenhouses as it provides very little shading of natural
light. |
|
| The Yield Master
2 Reflector features a 95% reflective German aluminum interior for
maximum output and uniformity and a durable and attractive white powder
coated finish on the outside. Oversize design is excellent for large
growing areas and is compatible with all Sun System remote ballasts. The
Yield Master 2 includes sealed and gasketed tempered glass, built-in
aerodynamic socket and lamp cord, and 6" fittings that allow maximum air
cooling. Dimensions are 22 ¾ long x 22 1/2" wide x 7 ¼" tall. |
 |
|
 |
Super Sun 2
Reflector - This reflector is Sunlight’s most popular reflector. It
measures 12” wide x 7” tall x 21” long. (26” long with socket mounting
bracket) It features Sunlight Supply’s unique “Adjust-A-Socket” mounting
bracket to center any length bulb. Will accommodate all HID lamp sizes
(except BT-56). Both sides and ends are angled and lined with a
revolutionary 95% reflective aluminum insert for maximum reflection and
light spread. Accepts 4” air cooled fittings and glass sold below. Light
socket assembly and cord sold separately. |
|
| Sun Grow Horizontal Reflector
is 20 1/2 in. long x 20 3/4 in. wide. It is constructed of white powder coated steel with
a aluminum specular insert. All 4 sides are angled in for maximum coverage. Can be easily
converted into an air cooled hood by attaching hose fittings. Also features Sunlight's
"adjust -a-socket" mechanism to center any lamp length and/or raise and lower
the lamp position inside the reflector to customize light patterns. This hood is available
with all 400, 430, 600, and 1000 watt systems. This Sunlight hood increases reflectivity
30% more than the large and mid-size hoods and is worth the upgrade. |
 |
|
 |
Vertizontal Reflector
has a 4 foot diameter. This innovative hood holds bulbs in the horizontal position, but in
an eight sided parabolic shaped reflector. The light is directed downward with out
interruption. It's design allows low mounting heights, which reduces the distance to the
plants and thus increases light levels. This hood is available with all 400, 430, 600, and
1000 watt systems. This hood requires assembly. Approximately 20 minutes. |
|
Vertical Burning
Parabolic Reflector
are available with all 400, 430, 600, and 1000 watt systems. 4 foot diameter hoods the
hold the bulb in an upright position. These hoods are OK if you want to spread the light
to the largest area possible. (Orchid Room) These hoods are inefficient in reflecting
light into a smaller concentrated area which is beneficial for indoor growing. This hood
requires assembly. Approximately 15 minutes.
(Note: Parabolic and conical reflectors are inefficient reflectors because
the lamps are mounted in a vertical position. Most of the light is reflected horizontally
away from the garden area. Horizontal reflectors reflect all of the light down, towards
the garden area. The Vertizontal hood from Sunlight Supply is the exception to this rule.) |
 |
|
 |
The Cool Sun
Reflector has 6" air cooled fittings that are built into the
reflector. Air passes easily through both ends of the reflector directly
over the lamp for maximum inline air cooling. Sturdy steel construction
with durable white powder coating. It measures 24" wide x 8" tall x
20.5" long. The socket and 15' lamp cord are built into the reflector,
so no wiring is required. It has a 95% reflective German insert for
excellent reflection and diffusion. This reflector allows very little
air leakage, while also eliminating excess heat problems. The Cool Sun
XL Reflector (bold) is available with 8" fittings. Tempered glass is
included with either unit. |
|
| The Agrotech Reflector is
made from highly reflective German aluminum for excellent reflectivity.
The textured German aluminum panel above the lamp improves light
diffusion. This lightweight reflector includes nuts and bolts for quick
and easy assembly. Assembled dimensions are 22'' long x 21 5/8" wide x 6
¼" tall. Socket assembly and lamp cord are pre-wired and come with this
reflector. This reflector is unable to accept glass. |
 |
|
